90.98.200-CE09

What is the primary function of this part?

The KEB 90.98.200-CE09 Powerbox is designed to optimize the turn-on and turn-off times of spring-applied brakes and electromagnets, providing efficient power management.

What are the input voltage requirements?

The Powerbox requires an input voltage of 180-300 V AC with a tolerance of ±0%.

How does this part contribute to energy savings?

The Powerbox reduces the release voltage to a smaller holding voltage after switch-on time, significantly lowering power consumption and resulting in cost savings.

What is the overexcitation time for this part?

The overexcitation time for the KEB 90.98.200-CE09 is 350 ms with a tolerance of ±10%.

What is the maximum cable length to the brake coil?

The maximum cable length to the brake coil is 100 meters.

What are the current specifications at different temperatures?

At 45°C, the continuous current is 1.2 A, with a peak of 2.4 A for 350 ms. At 75°C, the continuous current is 0.7 A, with a peak of 1.4 A for 350 ms.

What is the maximum switching rate for this part?

The maximum switching rate is 1 per minute at maximum current.

What are the installation options for this part?

The Powerbox can be mounted on a DIN rail or bolted on, providing flexibility in installation.

What is the altitude limitation for this part?

For altitudes above 1,000 meters, there is a 1% current reduction per meter.

What applications is this part suitable for?

The KEB 90.98.200-CE09 is suitable for use with spring-applied brakes and permanent magnet brakes, providing sufficient power to release and hold the brake with minimal energy.