2095738

What type of product is this?

This is a shielded sensor/actuator cable with a straight M12 female 5-pin A-coded connector on one end and flying leads on the other. It is designed for connecting industrial sensors and similar field devices where a preassembled connector and open cable end are required.

What connection style does it use?

The cable uses a straight M12 female 5-pin A-coded connector as head A, with flying leads at head B. This makes it suitable for installations where the device side needs a standard M12 connection and the control side is terminated directly into a panel, terminal block, or junction point.

How long is the cable?

The assembly is supplied as a 20 m cable. For applications that need a longer run from the sensor location back to the cabinet, this length can help reduce the need for intermediate connection points.

Is the cable shielded?

Yes. It is a shielded 5-wire cable, which can be useful in industrial environments where electrical noise reduction is important for stable signal transmission.

What is the cable jacket material?

The jacket is PUR, halogen-free, in black. PUR construction is commonly chosen for industrial cable assemblies because it offers good durability and resistance for demanding machine environments.

Can this cable be used in drag chain or robotic applications?

Yes. This model is specified for drag chain operation and robot applications, and it is also intended for areas with oils and lubricants. The datasheet also states up to 5,000,000 bending cycles and 2,000,000 torsion cycles under the stated conditions.

What are the electrical ratings?

Key electrical values include 4 A current loading, 300 V AC nominal cable voltage, 2,000 V AC test voltage, 60 V AC reference voltage, 60 V DC rated voltage, and 1.5 kV rated impulse voltage.

What conductor size does it use?

The cable has 5 conductors, each with a cross section of 0.34 mm². The overall cable diameter is 5.6 mm.

What are the operating temperature ranges?

For flexible use, the temperature range is -25 °C to +80 °C. In a stationary position, it is -40 °C to +80 °C. For drag chain operation, it is -25 °C to +80 °C, and the connector head is rated from -25 °C to +85 °C.

What ingress protection rating does it have?

The assembly is rated IP65, IP66K, and IP67. These ratings indicate suitability for use in demanding industrial environments where dust ingress and water exposure are concerns.

What are the recommended bending radii?

For flexible use, the minimum bending radius is greater than 10 times the cable diameter. In a stationary installation, it is greater than 5 times the cable diameter. For drag chain operation, it is again greater than 10 times the cable diameter.

What materials are used in the connector?

The connector body material is TPU, the locking nut is zinc die-cast with nickel plating, and the seal material is FKM. The connector color is black.

What tightening torque is specified for the M12 connection?

The specified tightening torque is 0.6 Nm. Applying the correct torque helps achieve the intended mechanical connection and sealing performance.

What is the pin and wire color arrangement?

The datasheet identifies the conductor colors as 1/BN, 2/WH, 3/BU, 4/BK, and 5/GY. In other words, the five wire colors are brown, white, blue, black, and gray.

Where is this cable typically used?

This type of assembly is typically used between industrial sensors or actuators and machine wiring points, especially where an M12 device connection is needed along with an open cable end for hard wiring. Part 2095738 is particularly suited to moving applications, including drag chains, robot systems, and oil-exposed machine areas.