What is the purpose of the ABB CDP-312R?
The ABB CDP-312R is a control panel keypad designed for use with ABB ACS800, ACS850, and ACSM1 series drives. It allows users to control and monitor the drive's operation, as well as configure settings and parameters.
How do I connect the CDP-312R to the drive?
To connect the CDP-312R control panel to the drive, you need to connect it to the X39 connector on the RDCU Drive Control Unit.
Can the CDP-312R be mounted on a DIN rail?
No, the CDP-312R is a control panel keypad and is not designed for DIN rail mounting. However, the RDCU Drive Control Unit, which the CDP-312R connects to, can be mounted on a vertical or horizontal 35 × 7.5 mm DIN rail.
What are the safety precautions to consider when working with the CDP-312R?
Before working on the drive or control panel, always switch off the mains and allow the intermediate circuit capacitors 5 minutes to discharge. Use a voltage indicating instrument to ensure the drive is discharged before beginning work. Avoid touching the circuit board inside the RDCU unit to minimize the risk of damage caused by static electricity.
How can I identify the correct application program for the CDP-312R?
Check the label attached to the cover of the RDCU unit, which lists 'SW TYPE', 'SW CODE', and 'DEVICE TYPE'. The 'SW TYPE' identifies the application program loaded into the RDCU unit. Ensure that the application program corresponds to the original order and that the 'DEVICE TYPE' matches the converter hardware.