6032869

What type of connection does this cable provide?

This is a pre-assembled connecting cable with a straight M12 female 8-pin connector on one end and flying leads on the other. It is designed for applications where a field connector is needed at the device side and open wiring is preferred at the control cabinet or machine wiring end.

What is this cable typically used for?

It is commonly used with industrial feedback and encoder-style connections that use incremental or SSI signal transmission. In practical terms, it suits machinery and automation systems where reliable signal transfer is needed between a sensor or feedback device and the wider control installation.

Is this suitable for incremental and SSI signals?

Yes. This cable is specified for incremental and SSI signal types, which makes it a good fit for a range of position and motion feedback applications. The SICK 6032869 is intended for signal transmission rather than heavy power duties.

How long is the cable?

The cable length is 20 metres, which can be useful where the device and termination point are spaced further apart across a machine or production line.

Is the cable shielded?

Yes, it is a shielded cable. Shielding helps reduce the effect of electrical noise in industrial environments, which is especially important when carrying encoder or signal-level communications.

What is the cable construction?

The cable is an 8-wire version with a conductor cross-section of 0.25 mm² and a construction listed as 4 x 2 x 0.25 mm². It has a black, halogen-free PUR jacket and an overall cable diameter of 7 mm.

Can this cable be used in moving applications?

Yes. It is described as suitable for drag chain use and is rated for more than 2,000,000 bending cycles. That makes it a practical option for installations where the cable is repeatedly flexed during normal machine movement.

What bending radius should be considered during installation?

For flexible use, the recommended minimum bending radius is more than 10 times the cable diameter. For stationary installation, it should be more than 5 times the cable diameter. Allowing for this during routing helps the cable perform as intended in service.

What enclosure rating does the cable assembly have?

The assembly is rated IP67. This makes it suitable for industrial environments where protection against dust ingress and temporary immersion is important, provided it is correctly fitted in the application.

What voltage and current is it designed for?

This cable is rated for up to 36 V AC/DC, with a current loading of 2 A. It is intended for signal and low-voltage connection duties within the limits stated for the product.

What are the operating temperature limits?

For flexible use, the operating temperature range is -25 °C to +80 °C. In a stationary position, it is rated from -50 °C to +80 °C. The connector head itself is rated from -25 °C to +80 °C.

What material is used for the connector and cable jacket?

The connector body material is TPU, while the cable jacket is PUR and halogen-free. This combination is well suited to industrial use where flexibility, durability and good environmental resistance are needed.

What should be checked before wiring the flying leads?

The most important point is to confirm the pin assignment before connection. For 8-pin sensor-actuator cables, wire colours are not universally standardised across all devices, so the termination should always follow the relevant connection scheme for the equipment being used.

Does the connector require a specific tightening torque?

Yes. The specified tightening torque is 0.5 Nm for the locking nut. Applying the correct torque helps achieve a secure fit without overtightening the connector.