What is the maximum number of axes that can be controlled by the Omron CJ1W-NCF71?
The Omron CJ1W-NCF71 can control up to 16 axes.
Which servo drives are compatible with the Omron CJ1W-NCF71?
The Omron CJ1W-NCF71 is compatible with Sigma-II series servo drives (version 38 or later) with MECHATROLINK-II Interface.
What types of control does the Omron CJ1W-NCF71 support?
The Omron CJ1W-NCF71 supports position, speed, and torque control.
Can I access servo drive parameters through the PLC operation?
Yes, you can access servo drive parameters through the PLC operation when using the Omron CJ1W-NCF71.
What are the control command ranges for the Omron CJ1W-NCF71?
The position command range is -2,147,483,648 to 2,147,483,647 command units. The speed command range for position control is 0 to 2,147,483,647 command units/s. The speed command range for speed control is -199.999% to 199.999%. The torque command range for torque control is -199.999% to 199.999%.
What types of acceleration/deceleration curves can be set with the Omron CJ1W-NCF71?
The Omron CJ1W-NCF71 allows you to set trapezoidal (linear) curves, exponential curves, or S-curves (moving average) for acceleration/deceleration.
Does the Omron CJ1W-NCF71 support fully closed control?
Yes, the Omron CJ1W-NCF71 supports position control with fully closed feedback.
What are the self-diagnostic functions of the Omron CJ1W-NCF71?
The self-diagnostic functions of the Omron CJ1W-NCF71 include watchdog, flash memory check, and memory corruption check.