What type of switch is this?
This is a miniature snap action switch designed for low force operation.
What is the rated current for this switch?
The switch is rated for 0.1A at 125VAC or 0.1A at 30VDC.
What type of actuator does this switch use?
The switch uses a long hinge lever actuator.
What is the operating force required for this switch?
The maximum operating force required is 20 grams.
What is the contact form of this switch?
The switch has a Single Pole Double Throw (SPDT) contact form.
What is the service life of this switch?
The switch has a mechanical service life of 10,000,000 operations and an electrical service life of 1,000,000 operations.
What are the terminal types available for this switch?
The switch is available with solder terminals or quick-connect terminals (#187).
What are the dimensions of this switch?
The switch has dimensions of 22.2mm x 27.8mm x 10.3mm.
What is the maximum overtravel for this switch?
The maximum overtravel for this switch is 3.2mm.
What is the insulation resistance of this switch?
The insulation resistance is 100 MΩ minimum at 500 VDC.
What is the dielectric strength of this switch?
The dielectric strength is 1,000 VAC for 1 minute between non-continuous terminals and 1,500 VAC for 1 minute between each terminal and ground.
What is the recommended mounting method for this switch?
The switch should be mounted using two M3 screws with a torque of 4 to 6 kg-cm.
What environmental conditions should be avoided when using this switch?
Avoid using the switch in environments with toxic gases, excessive dust, high humidity, or near oil-burning stoves.
What is the operating temperature range for this switch?
The operating temperature range is -25°C to 80°C.
What is the recommended soldering method for this switch?
Use a soldering iron rated at 60W and complete the soldering within 5 seconds to avoid deteriorating the switch characteristics.